Technical data
Surface cooled (t.e.f.c.)
Water cooled
Braking motor
A...A
ANWA ABGA Motors: 1PS0 (LOHER CHEMSTAR acc. to EN and IEC) Shaft heights: Frame size 071 to 355 mm (area of standard motors) Frame sizes 160 to 355 mm (area of standard motors) Frame sizes 090 to 250 mm (area of standard motors) Power range: (50 Hz types) Up to 315 kW (thermally utilized to temperature class B at TU = 40 °C) Up to 500 kW(thermally utilized to temperature class B for a water intake temperature of 20 °C) Up to 55 kW for braking torques from 32 to 400 Nm Number of poles: 2 - 12 pole; also higher numbers of poles for special versions pole changing -2 speeds e.g. 4/2, 8/4, 12/6 -3 speeds e.g. 8/4/2, 8/6/4 (Dahlander or separate windings) (square-law or constant torque applications) 2 - 6 pole 2 - 8 pole Voltage range: Up to 1000 V Up to 690 V Up to 690 V Rated voltage: All of the usual low-voltages and voltage ranges according to IEC 60038 However, also: Non-standard voltages and / or frequencies according to customer specifications Operating mode: S1 and various Degree of protection: IP55, IP56, to IP68 IP56, IP66 (higher degrees of protection on request) IP55, IP56, IP66 (higher degrees of protection on request) Cooling type: IC 411, IC 416, however, also special cooling types such as e.g. non-ventilated IC 410 IC 71 W IC 411, IC 416 Type of construction: IM B3, IM B5, IM B35, IM V1, IM V3, IM V5, IM V18, IM B14, IM B34 (special) IM B3, IM B6, IM B7, IM B8, IM B9, IM B15, IM V5, IM V6, IM V8, IM V9 IM B5, IM B35, IM V1, IM V3, IM B34, IM B14, IM V18, IM V19 (special) Enclosure: All 1PS0 motors in a gray cast iron design Bearings: Ball bearings (standard) and special bearings for high axial (thrust) and radial forces Standards: IEC, EN, DIN, VDE
Conveyor Motor Mesin Pertambangan